Face Trouble Of WiFi Signals- In Some Parts At Home 


Spread the love
14 / 100

Are you also facing trouble with WiFi signals at home? If your response is ‘YES’ then don’t worry we have a simple method to purchase a WiFi extender. So follow these step by step,

Let’s dive in, 

Difference Between These Three Boosters, Extender and Repeater?

These all work mostly the same and it improves the coverage area of devices. However most of the extenders do not work in the same way. There are many different kinds of devices available and below we aim to explain what is the difference between them and how it works. So that you have to choose the best WiFi extender/repeater/booster for home in your budget.

How to get internet without wifi on a tablet? Or do you lack a wifi password since you’re at a weird, unknown place? Here, we’ll go over how to connect a tablet computer to wifi without a password. Keep reading to find out what works for you.

Note: Prior to purchase an extender there is an couple of solution try them first,

Switch Frequency Bands

You can pick different WiFi channels for your router. It is very helpful to you when you switch to the 2.4GHz band. Just try to use a WiFi scanner to check the 2.4GHz frequency band for your area. If you don’t know how to change the frequency band then you can follow these step,

  • Enter the IP address ap.setup in the URL bar of the web browser.
  • Now leave the user field blank and enter the admin password.
  • After this click on wireless from the menu.
  • From the frequency band section field, you can pick 2.4GHz or 5GHz bands.
  • Now click on the apply button to save all the settings.

Update Firmware Of Router

Most of the issue is the slow speed of the internet due to outdated firmware. So, I tell you that you must update the software of an extender. If you want to know how you can update the software then follow these instructions step by step,

  • First of all you have to connect your router with the computer.
  • Now download the latest firmware from the official website wifi.wavlink.com.
  •  Visit your device’s web settings and management page.
  • From that page pick the download firmware to update your router.
  • As a result, reboot your router to complete this upgrade.

Change Position Of Router

Position of the router also has a big impact on router performance. When your router is near the metal objects then it does not work properly as it should. So we suggest you place your router at a halfway location of your house. You must be sure that your router is not much closer to metal objects because these objects produce wireless interference. Objects such as walls, microwaves, refrigerators, etc.

After trying these three methods if you are still faces an slow speed of internet issue then follow that step which we discuss above,

Prior to connecting an extender with a router first you have to set up an extender, if you don’t know how to set up then go to the wavlink extender setup portal and follow the steps carefully.

There are two methods by which you can connect your extender very easily,

  1. By WiFi protected setup.
  2. By the use of an ethernet cable.

Note: Only you can follow the first step if your router supports the WPS function. If not then follow another method to connect the extender with the router.

By WiFi Protected Setup

  • First you have to join the plug of an extender in the power socket. 
  • Now, depress the WiFi protected setup button of your main WiFi router.
  • After that, just within 2 minutes hold the WiFi protected setup button of the extender. 
  • Now see the signal LED light of both the extender and router. 
  • If you see green LED light on both of them then it means they both successfully connect to each other.

By The Use Of An Ethernet Cable

  • First you have to connect an ethernet cable to the ethernet port of an extender.
  • Now, join the other end of the ethernet cable to the ethernet port of the router. 
  • After doing this connect your extender to the power socket.
  • Also, put the plug of the router in a power socket.
  • Now wait for a few minutes to become a solid LED light of both extender and router.
  • As a result, extenders successfully connect to each other.

To Conclude…

After reading this article, we hope you will be able to improve the speed of the router in very easy and simple steps. If you are still facing any doubt then contact your ISP. Keep in touch for more updates.


Kevin Peter

0 Comments

Your email address will not be published. Required fields are marked *